Header
LeftSide
LeftSide
RightSide
GreyBox-TL GreyBox-T
GreyBox-L
GreyBox-BL
Logo-Paradigm

> Visit Manufacturers Site

Signature Series Speakers

Signature S1 - Signature S2 - Signature S6 - Signature S8 - Signature C1 - Signature C3 - Signature C5
Signature ADP1 - Signature ADP3 - Sig LCR - Sig 1.5R - Sig 1.5R-30 -
Sig ADP

SignS1
View a brochure on this product Enquire about our products & services

SignatureS1

Design:                             2-driver, 2-way ultra-compact
High-Frequency Driver:  25-mm (1 in) P-Be™ dome, ferro-fluid damped / cooled,
                                          rear damping chamber with ARB™ fins and integrated
                                          heatsink, dual super-neodymium ring magnets, die-cast
                                          enclosure / integrated heatsink chassis
Bass / Midrange Driver: 155-mm (6 in) Co-PAL™ cone, overmolded NLC™
                                          surround, 38-mm (1-1/2 in) split voice-coil,
                                          super-neodymium ring magnet, integrated AVS™ baffle /
                                          die-cast heatsink chassis

Frequency Response:          On-Axis                            30° Off-Axis
                                ±2 dB from 65 Hz - 45 kHz   ±2 dB from 65 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 175 watts
Maximum Input Power†                        100 watts
Impedance Compatible:                       8 ohms
Height, Width, Depth:                           27.0 cm x 17.0 cm x 22.0 cm
Weight (unpacked)                               5.8 kg / 12.5 lb each
Finishes                                                 Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time.

Divider
SignS2

TOP

Signature S2

Design:                             2-driver, 2-way bookshelf / stand-mounted

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, ferro-fluid damped / cooled,
                                          rear damping chamber with ARB™ fins and integrated
                                          heatsink, dual super-neodymium ring magnets, die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™
Bass / Midrange Driver: 178-mm (7 in) Co-PAL™ cone, overmolded NLC™
                                          surround, 38-mm (1-1/2 in) split voice-coil, hard ferrite
                                          magnet, AVS™ die-cast heatsink chassis,
                                          IMS/SHOCK-MOUNT™

Frequency Response:          On-Axis                            30° Off-Axis
                                ±2 dB from 52 Hz - 45 kHz   ±2 dB from 52 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 225 watts
Maximum Input Power†                       140 watts
Impedance Compatible                       8 ohms
Height, Width, Depth:                           38.1 cm x 21.0 cm x 35.6 cm
Weight (unpacked)                               12.7 kg / 28 lb each
Finishes                                                 Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time.

View a brochure on this product Enquire about our products & services
Divider
SignS6

TOP

Signature S6

Design:                             4-driver, 3-way floorstanding

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, ferro-fluid damped / cooled,
                                          rear damping chamber with ARB™ fins and integrated
                                          heatsink, dual super-neodymium ring magnets, die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™
Midrange Driver:             178-mm (7 in) Co-PAL™ cone, ferro-fluid damped / cooled,
                                          ATC™ chambers, 38-mm (1-1/2 in) dual-layer voice-coil,
                                          super-neodymium ring magnets, AVS™ die-cast heatsink
                                          chassis, IMS/SHOCK-MOUNT™
Bass Drivers:                   Two 178-mm (7 in) mineral-filled polypropylene cones,
                                          overmolded NLC™ surrounds, 38-mm (1-1/2 in) four-layer
                                          bifilar long-excursion voice-coils, massive hard ferrite
                                          magnets, AVS™ die-cast heatsink chassis,
                                          IMS/SHOCK-MOUNT™

Frequency Response:          On-Axis                            30° Off-Axis
                                ±2 dB from 45 Hz - 45 kHz   ±2 dB from 45 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 400 watts
Maximum Input Power†                        200 watts
Impedance Compatible:                      8 ohms
Height, Width, Depth                            111.0 cm x 21.0 cm x 34.5 cm
                                  (Height includes spikes and outrigger feet, widths do not include feet)
Weight (unpacked)                               31.8 kg / 70 lb each
Finishes:                                                Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time.

View a brochure on this product Enquire about our products & services
Divider
SignS8

TOP

Signature S8

Design:                             6-driver, 3-way floorstanding

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, ferro-fluid damped / cooled,
                                          rear damping chamber with ARB™ fins and integrated
                                          heatsink, dual super-neodymium ring magnets, die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™
Midrange Driver:             178-mm (7 in) Co-PAL™ cone, ferro-fluid damped / cooled,
                                          ATC™ chambers, 38-mm (1-1/2 in) dual-layer voice-coil,
                                          super-neodymium ring magnets, AVS™ die-cast heatsink
                                          chassis, IMS/SHOCK-MOUNT™
Bass Drivers:                   Four 178-mm (7 in) mineral-filled polypropylene cones,
                                          overmolded NLC™ surrounds, 38-mm (1-1/2 in) four-layer
                                          long-excursion voice-coils, massive hard ferrite magnets,
                                          AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™

Frequency Response:         On-Axis                             30° Off-Axis
                              ±2 dB from 39 Hz - 45 kHz     ±2 dB from 39 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 500 watts
Maximum Input Power†                        250 watts
Impedance Compatible:                      8 ohms
Height, Width, Depth:                           123.2 cm x 21.0 cm x 52.1 cm
                                    (Height includes spikes and outrigger feet, widths do not include feet)
Weight (unpacked)                               45.3 kg / 100 lb each
Finishes:                                                Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time.

View a brochure on this product Enquire about our products & services
Divider
SignC1

TOP

Signature C1

Design                              4-driver, 3-way ultra-compact center channel

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, ferro-fluid damped / cooled,
                                          rear damping chamber with ARB™ fins and integrated
                                          heatsink, dual super-neodymium ring magnets, die-cast
                                          enclosure / integrated heatsink chassis
Midrange Driver:             85-mm (3-1/2 in) Co-PAL™ cone, ferro-fluid damped /
                                          cooled, ATC™ chambers, 25-mm (1 in) dual-layer
                                          voice-coil, super-neodymium ring magnets, AVS™
                                          die-cast heatsink chassis
Bass Drivers:                   Two 127-mm (5 in) mineral-filled polypropylene cones,
                                          overmolded NLC™ surrounds, 38-mm (1-1/2 in) two-layer
                                          split voice-coils, super-neodymium ring magnets, AVS™
                                          die-cast heatsink chassis

Frequency Response:          On-Axis                            30° Off-Axis
                               ±2 dB from 73 Hz - 35 kHz    ±2 dB from 73 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 225 watts
Maximum Input Power†                       140 watts
Impedance Compatible:                      8 ohms
Height, Width, Depth:                           18.0 cm x 43.0 cm x 22.5 cm
Weight (unpacked)                               10.5 kg / 25 lb each
Finishes:                                                Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time.

View a brochure on this product Enquire about our products & services
Divider
SignC3

TOP

Signature C3

Design:                             4-driver, 3-way center channel

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, ferro-fluid damped / cooled,
                                          rear damping chamber with ARB™ fins and integrated
                                          heatsink, dual super-neodymium ring magnets, die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™
Midrange Driver:             102-mm (4 in) Co-PAL™ cone, ferro-fluid damped / cooled,
                                          ATC™ chambers, 25-mm (1 in) dual-layer voice-coil,
                                          super-neodymium ring magnets, AVS™ die-cast heatsink
                                          chassis, IMS/SHOCK-MOUNT™
Bass Drivers:                   Two 178-mm (7 in) mineral-filled polypropylene cones,
                                          overmolded NLC™ surrounds, 38-mm (1-1/2 in) four-layer
                                          voice-coils, massive hard ferrite magnets, AVS™ die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™

Frequency Response:         On-Axis                             30° Off-Axis
                              ±2 dB from 46 Hz - 35 kHz     ±2 dB from 46 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 325 watts
Maximum Input Power†                       180 watts
Impedance Compatible:                      8 ohms
Height, Width, Depth:                           24.1 cm x 67.3 cm x 33.0 cm
                                                 (Height includes outrigger feet, widths do not include feet)
Weight (unpacked)                               20.4 kg / 45 lb each
Finishes:                                                Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time.
 

View a brochure on this product Enquire about our products & services
Divider
SignC5

TOP

Signature C5

Design:                             6-driver, 3-1/2-way center channel

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, ferro-fluid damped / cooled,
                                          rear damping chamber with ARB™ fins and integrated
                                          heatsink, dual super-neodymium ring magnets, die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™
Midrange Driver:             102-mm (4 in) Co-PAL™ cone, ferro-fluid damped / cooled,
                                          ATC™ chambers, 25-mm (1 in) dual-layer voice-coil,
                                          super-neodymium ring magnets, AVS™ die-cast heatsink
                                          chassis, IMS/SHOCK-MOUNT™
Bass/Midrange Drivers: Two 178-mm (7 in) Co-PAL™ cones, overmolded NLC™
                                          surrounds, 38-mm (1-1/2 in) dual-layer long-excursion
                                          voice-coils, massive hard ferrite magnet, AVS™ die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™
Bass Drivers:                   Two 178-mm (7 in) mineral-filled polypropylene cones,
                                          overmolded NLC™ surrounds, 38-mm (1-1/2 in) dual-layer
                                          long-excursion voice-coils, massive hard ferrite magnets,
                                          AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™

Frequency Response:         On-Axis                             30° Off-Axis
                              ±2 dB from 43 Hz - 35 kHz     ±2 dB from 43 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 500 watts
Maximum Input Power†                        250 watts
Impedance Compatible:                      8 ohms
Height, Width, Depth:                           24.1 cm x 95.3 cm x 44.4 cm
                                          (Height includes outrigger feet, widths do not include feet)
Weight (unpacked)                               36.7 kg / 81 lb each
Finishes:                                                Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time.

View a brochure on this product Enquire about our products & services
Divider
SignADP1

TOP

Signature ADP1

Design:                              5-driver, 3-way ultra-compact surround / rear

High-Frequency Drivers: Two 25-mm (1 in) P-Be™ domes, ferro-fluid damped /
                                           cooled, rear damping chambers with ARB™ fins
                                           and integrated heatsinks, dual super-neodymium ring
                                           magnets, die-cast heatsink chassis,
                                           IMS/SHOCK-MOUNT™
Midrange Drivers:            Two 85-mm (3-1/2 in) Co-PAL™ cones, ferro-fluid
                                           damped / cooled, ATC™ chambers, 25-mm (1 in)
                                           dual-layer voice-coils, super-neodymium ring magnets,
                                           AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™
Bass Driver:                     155-mm (6 in) mineral-filled polypropylene cone,
                                           overmolded NLC™ surrounds, 38-mm (1-1/2 in) dual-layer
                                           long-excursion voice-coil, massive hard ferrite magnets,
                                           integrated AVS™ baffle / die-cast heatsink chassis,
                                           IMS/SHOCK-MOUNT™

Frequency Response:          On-Axis                                      30° Off-Axis
                               ±2 dB from 100 Hz - 45 kHz     (optimized reverberant soundfield)

Suitable Amplifier Power Range:       15 - 225 watts
Maximum Input Power†                       140 watts
Impedance Compatible:                      8 ohms
Height, Width, Depth:                           19.0 cm x 30.5 cm x 15.5 cm
Weight (unpacked)                               7.0 kg / 15.5 lb each
Finishes:                                                Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time.

View a brochure on this product Enquire about our products & services
Divider
SignADP3

TOP

Signature ADP3

Design:                             5-driver, 3-way surround / rear

High-Frequency Drivers:Two 25-mm (1 in) P-Be™ domes, ferro-fluid damped /
                                          cooled, rear damping chambers with ARB™ fins and
                                          integrated heatsink, ceramic / ferrite magnets, die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™
Midrange Drivers:           Two 102-mm (4 in) Co-PAL™ cones, ferro-fluid damped /
                                          cooled, ATC™ chambers, 25-mm (1 in) dual-layer
                                          voice-coils, super-neodymium ring magnets, AVS™
                                          die-cast heatsink chassis, IMS/SHOCK-MOUNT™
Bass Driver:                     210-mm (8 in) mineral-filled polypropylene cone,
                                          overmolded NLC™ surrounds, 38-mm (1-1/2 in) dual-layer
                                          long-excursion voice-coil, massive ceramic / ferrite
                                          magnets, AVS™ die-cast heatsink chassis,
                                          IMS/SHOCK-MOUNT™

Frequency Response:          On-Axis                                      30° Off-Axis
                                ±2 dB from 82 Hz - 45 kHz     (optimized reverberant soundfield)

Suitable Amplifier Power Range:       15 - 250 watts
Maximum Input Power†                       180 watts
Impedance Compatible:                       8 ohms
Height, Width, Depth:                           33.7 cm x 35.9 cm x 19.1 cm
Weight (unpacked)                               16.8 kg / 26 lb each
Finishes:                                                Cherry, Piano Black

† With typical program source, provided the amplifier clips no more than 10% of the time
.

View a brochure on this product Enquire about our products & services
Divider
SignLCR

TOP

Sig - LCR

Design:                             6-driver, 3-1/2-way integrated in-wall left / center / right
                                          system, critical bracing and volume supplied by
                                          required Paradigm BX-LCR 5 backbox (sold sep.)

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, rear damping chamber with
                                          ARB™ fins and integrated heatsink, dual
                                          super-neodymium magnets, die-cast heatsink chassis,
                                          IMS/SHOCK-MOUNT™
Midrange Driver:             115-mm (4-1/2 in) Co-PAL™ cone, anodized
                                          solid-aluminum phase plug, 25-mm (1 in) dual-layer
                                          voice-coil, dual super-neodymium magnets, AVS™
                                          die-cast heatsink chassis, IMS/SHOCK-MOUNT™
Bass / Midrange Drivers:Two 178-mm (7 in) Co-PAL™ cones, anodized
                                          solid-aluminum phase plugs, 38-mm (1-1/2 in) dual-layer
                                          voice-coils, ceramic / ferrite magnets, AVS™ die-cast
                                          heatsink chassis, IMS/SHOCK-MOUNT™
Bass Drivers:                   Two 178-mm (7 in) mineral-filled polypropylene cones,
                                          38-mm (1-1/2 in) four-layer voice-coils, massive ceramic /
                                          ferrite magnets, AVS™ die-cast heatsink chassis,
                                          IMS/SHOCK-MOUNT™

Frequency Response:          On-Axis                              30° Off-Axis
                                ±2 dB from 58 Hz - 45 kHz    ±2 dB from 58 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 500 watts
Maximum Input Power†                        250 watts
Impedance Compatible:                      8 ohms
Outer Dimensions of Speaker
Frame: (H x W)                                      92.5 cm x 23.0 cm
Speaker Weight (unpacked)               10.4 kg / 23 lb each
Backbox Weight (unpacked)               19.0 kg / 42 lb each
Finish:                                                     White, paintable
Required Backbox (sold sep.) BX-LCR 5

† With typical program source, provided the amplifier clips no more than 10% of the time.

View a brochure on this product Enquire about our products & services
Divider
Sign1-5R

TOP

Sig - 1.5R

Design:                             2-driver, 2-way in-ceiling / in-wall, GRIP™ chassis /
                                          mounting bracket

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, rear damping chamber with
                                          ARB™ fins and integrated heatsink, dual super-neodymium
                                          magnets, die-cast heatsink chassis
Bass / Midrange Driver: 210-mm (8 in) Co-PAL™ cone, anodized solid-aluminum
                                          phase plug, 38-mm (1-1/2 in) dual-layer voice-coil, ceramic /
                                          ferrite magnets, AVS™ die-cast heatsink chassis

Frequency Response:          On-Axis                            30° Off-Axis
                               ±2 dB from 58 Hz - 45 kHz     ±2 dB from 58 Hz - 20 kHz

Suitable Amplifier Power Range:       15 - 225 watts
Maximum Input Power†                       140 watts
Impedance Compatible:                      8 ohms
External Dimensions: (D or H x W)     22.6 cm
Minimum Mounting Depth**                 10.0 cm
Cutout Dimensions: (D or H x W)        20.0 cm
Minimum Internal Volume Required    20 L / 0.70 cu ft
Weight (unpacked)                               1.6 kg / 3.5 lb each
Finish:                                                     White, paintable

† With typical program source, provided the amplifier clips no more than 10% of the time.

** Depth required is the distance between 1/2˝ drywall, or similar material.

View a brochure on this product Enquire about our products & services
Divider
Sign1-5-30

TOP

Sig - 1.5R/30

Design Guided Soundfield™ system: 2-driver,
                                                                 2-way in-ceiling, drivers mounted at 30°
                                                                relative to mounting surface, Ultra-Rigid™
                                                                die-cast chassis with GRIP™ mounting bracket

High-Frequency Driver:  25-mm (1 in) P-Be™ dome, rear damping chamber with
                                          ARB™ fins and integrated heatsink, dual super-neodymium
                                          magnets, die-cast heatsink chassis
Bass / Midrange Driver: 210-mm (8 in) Co-PAL™ cone, anodized solid-aluminum
                                          phase plug, 38-mm (1-1/2 in) dual-layer voice-coil, ceramic /
                                          ferrite magnets, AVS™ die-cast heatsink chassis

Frequency Response:         On-Axis                             30° Off-Axis
                               ±2 dB from 58 Hz - 45 kHz    ±2 dB from 58 Hz - 17 kHz

Suitable Amplifier Power Range:       15 - 225 watts
Maximum Input Power†                       140 watts
Impedance Compatible:                      8 ohms
External Dimensions: (D or H x W)     29.6 cm
Minimum Mounting Depth**                 13.9 cm
Cutout Dimensions: (D or H x W)        27.0 cm
Minimum Internal Volume Required:   20 L / 0.70 cu ft
Weight (unpacked)                               2.0 kg / 4.4 lb each
Finish:                                                    White, paintable

† With typical program source, provided the amplifier clips no more than 10% of the time.

** Depth required is the distance between 1/2˝ drywall, or similar material.

View a brochure on this product Enquire about our products & services
Divider
SignADP

TOP

Sig - ADP

Design:                             7-driver, 3-way in-wall surround / rear, Ultra-Rigid™
                                          die-cast chassis / mounting bracket (optimized
                                          reverberant soundfield)

High-Frequency Drivers:Two 25-mm (1 in) P-Be™ domes, rear damping chamber
                                          with ARB™ fins and integrated heatsink, dual
                                          super-neodymium magnets, die-cast heatsink chassis
Midrange Drivers:           Four 29-mm (1-1/8 in) x 102-mm (4 in) Co-PAL™ cones,
                                          14-mm (9/16 in) four-layer voice-coils, dual
                                          super-neodymium magnets, AVS™ die-cast heatsink
                                          chassis, IMS/SHOCK-MOUNT™
Bass Driver:                     210-mm (8 in) mineral-filled polypropylene cone, 38-mm
                                          (1-1/2 in) four-layer voice-coil, massive ceramic / ferrite
                                          magnet, AVS™ die-cast heatsink chassis,
                                          IMS/SHOCK-MOUNT™

Frequency Response:         On-Axis                             30° Off-Axis
                              ±2 dB from 48 Hz - 45 kHz        (reverberant soundfield)

Suitable Amplifier Power Range:       15 - 180 watts
Maximum Input Power†                       120 watts
Impedance Compatible:                      8 ohms
External Dimensions:(D or H x W)      51.0 cm x 23.1 cm
Minimum Mounting Depth**                 7.6 cm
Cutout Dimensions: (D or H x W)       48.6 cm x 20.7 cm
Minimum Internal Volume Required:   20 L / 0.70 cu ft
Weight (unpacked)                               5.6 kg / 12.3 lb each
Finish:                                                     White, paintable
Pre-Construction Bracket (sold sep.) PB-8x19; retrofit included

† With typical program source, provided the amplifier clips no more than 10% of the time.

** Depth required is the distance between 1/2˝ drywall, or similar material.

View a brochure on this product Enquire about our products & services

TOP

GreyBox-B
GreyBox-TR
GreyBox-R
GreyBox-BR
RightSide
Bottom

Copyright & Disclaimer

© Copyright 2012 The Audiophile, a division of Tasman Satellite Services Limited, All rights reserved.
Site Developed by Duke Design.