Header
LeftSide
LeftSide
RightSide
GreyBox-TL GreyBox-T
GreyBox-L
GreyBox-BL
Logo-ProAc

> Visit Manufacturers Site

ProAc Speakers

Tablette - Studio 100 - Studio 115 - Studio 140 Mk2 - Studio Centre - Response D1 - Response D2
Response D18 - Response D28 - Response 40r - Response D Monitor - Response ER1 Sub Woofer
ProAc K6 - Carbon Pro 6 - Carbon Pro 8

Tablette1
EnquireN

TOP

Tablette

Nominal Impedance           8 ohms
Recommended Amplifiers  10 to 100 Watts
Frequency Response        35hz to 30Khz
Sensitivity                          86.5 dB linear for 1 watt at 1 metre
Bass/Midrange Driver        5 7/8” (150mm) Polymer Impregnated
                                          Kevlar cone with black acrylic phase plug
Tweeter                              ” (20mm) ProAc silk dome with damped front plate
Crossover                          Finest components on dedicated circuit board.
                                          Multistrand oxygen-free cabling throughout, split for optional
                                          bi-wiring/ bi-amping
Dimensions                        Height: 10 5/8” (270mm)
                                          Width: 6” (150mm)
                                          Depth: 9 ” (235mm) including grille
Weight                               5 Kgs each
Mode                                 Stand/Shelf mounting
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany, Cherry, Maple & Ebony

* Due to our policy of continuous improvement specifications are subject to change without notice.

Divider
Studio100

TOP

Studio 100

Nominal Impedance           8 ohms
Recommended Amplifiers  30 to 150 watts
Frequency Response        35hz to 30Khz
Sensitivity                          88db linear for 1 watt at 1 metreBass/Midrange
Driver                                 6 1/2" treated cone with special centre pole plug.
Tweeter                             1" (25mm) soft fabric dome with ferrofluid and rear loading.
                                          Mirror image offset.
Crossover                          Finest components on dedicated circuit board. Multi-strand
                                          oxygen-free copper cable throughout. Split for optional bi-wiring
                                          and bi-amping.
Dimensions                        16" (406mm) high
                                          8" (203mm) wide
                                          10" (254mm) deep
Weight                               24 lbs (11kg) /cabinet
Mode                                 Stand mounted
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany, Cherry and Maple.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
Studio-115

TOP

Studio 115

Nominal Impedance           8 ohms
Recommended Amplifiers  15 to 150 watts
Frequency Response        30hz to 30Khz
Sensitivity                          88.5 dB linear for 1 watt at 1 metre
Bass Driver                        6.5" (165mm) ProAc unit with carbon filled polyproalene cone
                                          & high linear spider.
Tweeter                             0.75" all new ProAc silk dome.
Crossover                          HQ network using the finest components with option for
                                          bi wiring / bi-amping and utilising oxygen free cable..
Dimensions                        Height: 15.2" (380mm)
                                          Width: 7.6" (190mm)
                                          Depth: 9.64" (241mm) with grill
Weight                               8.9kg each unpacked.
Mode                                 Stand Mounted
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany, Cherry and Maple.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
Studio-140mk2

TOP

Studio 140 Mk2

Nominal Impedance           8 ohms, minimum 4 ohms
Recommended Amplifiers  15 to 250 watts
Frequency Response        25hz to 30Khz
Sensitivity                          91db linear for 1 watt at 1 metre
Bass/Midrange                   2 x 165mm (6 1/2") ProAc unit with carbon filled polypropylene
                                          cone, anti-resonant dust cap, raised spider for greater linearity
                                          and large shielded magnet assembly.
Tweeter                             ProAc 25mm (1") direct radiating silk dome.
Crossover                          HQ network using the finest components with option for
                                          bi-amping/bi-wiring and utilising oxygen free cable.
Terminals                          Response type high quality terminals.
Dimensions                        41" (1040mm) high on plinth and spikes
                                          7.5" (190mm) wide
                                          11" (280mm) deep
Weight                               20kg each with spikes and plinths
Mode                                 Floor standing with spikes
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany, Cherry, Maple.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
studio140mk2_whifi
Divider
Studio-Centre

TOP

Studio Centre

Nominal Impedance           4 ohms
Recommended Amplifiers  10 to 150 watts
Frequency Response        35hz to 30Khz
Sensitivity                          89db linear for 1 watt at 1 metre
Bass/Midrange                  Shielded 5" (130mm) ProAc unit with special coated pulp cone.
Tweeter                             Shielded 1" (25mm) soft silk dome with special inner damping.
Crossover                          HQC network with studio range matched slopes using the finest
                                          components, wired with multistrand oxygen free cable, split for
                                          bi-wiring/amping
Dimensions                        7 3⁄4" (197mm) high
                                          17 1⁄4" (439mm) wide
                                          8" (204mm) deep
Weight                               20lbs (9kgs)
Mode                                 Horizontal on television/shelf/stand
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany, Cherry, Maple.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
Response-D1

TOP

Response D1

Taking miniature loudspeaker performance to new heights
Nominal Impedance           8 ohms
Recommended Amplifiers  20 to 100 watts
Frequency Response        38Hz to 30kHz
Sensitivity                          87.5 db linear for 1 watt at 1 metre
Cabinet                              Heavy, inert construction damped with special material and
                                          featuring slim, rigid front baffle design to aid dispersion.
Bass/Midrange Driver        New 5" (130mm) ProAc unit featuring glass fibre weave cone,
                                          raised spider assembly, EXCEL magnet system and unique
                                          acrylic damping phase plug.
Tweeter                             ProAc dome unit with honeycomb wound voice coil,
                                          special damping and ferrofluid-cooled coil assembly.
Crossover                          Finest components on dedicated circuit board with multistrand
                                          oxygen-free copper cable throughout. Split for optional
                                          bi-wiring/bi-amping.
Dimensions                        12" (305mm) high
                                          6 5/8" (168mm) wide
                                          10 1/4" (260mm) deep including grille thickness of 12mm
Weight                               20lbs (9 Kgs)
Mode                                 Stand mounted
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany, Cherry, and Maple.
                                          Ebony to order at extra cost.
* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
Response-D2

TOP

Response D2

Nominal Impedance           8 ohms
Recommended Amplifiers  30 to 150 watts
Frequency Response        30hz to 30Khz
Sensitivity                          88.5db linear for 1 watt at 1 metre
Bass Driver                        New 61/2” (165mm) ProAc unit with Excel Magnet system,
                                          glass fibre weave cone and copper phase plug.
Tweeter                             ProAc 1” (25mm) silk dome air cooled and inner damping.
Crossover                          HQ network using the finest components with option for
                                          bi-wiring/bi-amping using oxygen cable.
Dimensions                        17” (430mm) high
                                          8” (203mm) wide
                                          101/4” (260mm) deep
Weight                               24 lbs (11kg) /cabinet
Mode                                 Stand mounted on rigid high mass.
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany,Cherry, Maple as standard and
                                          Ebony and Birds Eye Maple at extra cost.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
whf_dtwo
Divider
Response-D18

TOP

Response D18

Audiophile excellence, a smooth and dynamic performer
Nominal Impedance           8 ohms
Recommended Amplifiers  20 to 180 watts
Frequency Response        30Hz to 30kHz
Sensitivity                          88 db linear for 1 watt at 1 metre
Cabinet                              Heavy, inert construction damped with special material and
                                          featuring side venting for improved bass loading.
Bass/Midrange Driver        New 6" (165mm) ProAc unit featuring glass fibre weave cone,
                                          large EXCEL magnet system and unique acrylic damping
                                          phase plug.
Tweeter                             dome unit with honeycomb wound voice coil, special damping
                                          and ferrofluid-cooled coil assembly
Crossover                          Finest components on dedicated circuit board with multistrand
                                          oxygen-free copper cable throughout. Split for optional
                                          bi-wiring/bi-amping.
Dimensions                        36 5/8" (930mm) High - 38" (965mm) including plinth and
                                          conical feet
                                          7 1/2" (190mm) wide
                                          10 3/8 "(265mm) deep
Weight                               55lbs (25 Kgs)
Mode                                 Floorstanding
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany, Cherry and Maple.
                                          Ebony to order at extra cost.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
whf_d18 whf_winner_d18
Divider
Response-D28

TOP

Response D28

Nominal Impedance           8 ohms
Recommended Amplifiers 10 to 200 watts
Frequency Response        20hz to 30Khz
Sensitivity                          88.5db linear for 1 watt at 1 metre
Bass/Midrange                   61⁄2” (165mm) ProAc unit, professionally made with coated
                                          polypropylene cone on die-cast chassis.
Tweeter                             1” (25mm) ProAc silk dome with special surround and air cooling.
Crossover                          HQC network using the finest dedicated components, wired
                                          with multistrand oxygen free copper cable, split for
                                          bi-wiring/amping.
Dimensions                        421⁄2” (1080mm) high on plinths with conical feet
                                          8” (204mm) wide
                                          111⁄4” (286mm) deep
Weight                               60lbs (27kgs) each cabinet
Mode                                 Floorstanding
Grille                                  Acoustically transparent crimplene
Finish                                Black Ash, Maple, Mahogany, Cherry, Ebony and Bird's Eye Maple.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
Response-40R

TOP

Response 40R

Nominal Impedance           4 ohms
Recommended Amplifiers 10 to 250 Watts
Frequency Response        20hz to 30Khz
Sensitivity                          90 dB linear for 1 watt at 1 metre
Bass/Midrange Driver        6 1/2” (165mm) ProAc unit featuring carbon fibre ultra fine weave
                                          cone on die- cast chassis.
Tweeter D40R                   ProAc ribbon 60mm x 10mm ‘light as a human hair’ with rear
                                          chamber damping.
Tweeter D40                      ProAc 1” (25mm) soft dome with special surround & inner
                                          damping.
Crossover                          HQC using dedicated components wired throughout with
                                          ProAc multistrand oxygen-free copper cable. Split for optional
                                          bi-wiring/bi-amping
Dimensions                        47 1/4” (1200mm) high on plinths with conical feet
                                          8 1/3” (212mm) wide
                                          13 ” (342mm) deep
Weight                               88 lbs (40 Kgs) each
Mode                                 Floor standing
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Mahogany, Cherry & Maple. Bird’s Eye Maple &
                                          Ebony to order at extra cost.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
Response-DMon

TOP

Response D Monitor

Nominal Impedance           4 ohms
Recommended Amplifiers  20 to 300 watts
Frequency Response        25hz to 30Khz
Sensitivity                          90db linear for 1 watt at 1 metre
Bass/Midrange (2)             61⁄2” (165mm) ProAc unit with special coil and shielded
                                          magnetic system.
Tweeter                             1” (25mm) soft silk dome with air cooling.
Crossover                          Super HQ PCB with finest components and multi strand cable.
Dimensions                        93⁄4” (250mm) high
                                          26” (660mm) wide
                                          113⁄4” (300mm) deep
Weight                               55lbs (25kgs)
Mode                                 TV/Stand mounted
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Cherry, Maple and Mahogany. Ebony and Birds
                                          Eye Maple to special order.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
Response-Sub

TOP

Response ER1 Sub Woofer

Amplifier                             150 watts to 200 peak
Frequency Response        18hz to 120hz (minus 6db at 18hz)
Bass Driver                        10” (250mm) carbon fibre composite on cast chassis with
                                          inner breather.
Enclosure                          Equalised reflex.
Dimensions                        15" (380mm) cube
                                          17" (431mm) high on feet
Weight                               44lbs (20kg)
Mode                                 Floorstanding
Grille                                  Acoustically transparent crimplene
Finish                                 Black Ash, Cherry and Mahogany.

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
whi2
Divider
ProAc-K6

TOP

ProAc K6

Nominal Impedance           4 ohms
Recommended Amplifiers  10 to 250 Watts
Frequency Response        25hz to 30Khz
Sensitivity                          90 dB linear for 1 watt at 1 metre
Bass Driver                        2 x 61/2” (165mm) studio professional drive units with polymer
                                          impregnated Kevlar cones and Zinc basket
Midrange Driver                 2” (50mm) soft dome with 6061 Aluminium Alloy Front Plate
Tweeter                             ProAc ribbon with diaphragm ‘as light as a human hair’ alnico
                                          magnet and rear chamber damping and 6061 Aluminium Alloy
                                          Front Plate
Crossover                          Finest components on dedicated dual layer circuit board;
                                          ProAc multistrand oxygen-free copper cable throughout;
                                          Split for optional bi-wiring and bi-amping
Dimensions                        46” high (1185mm) with spikes and plinths
                                          8.5” (215mm) wide
                                          13.5” (340mm) deep
Weight                               97 lbs (44 Kgs) each
Mode                                 Floorstanding on spikes
Grille                                  Acoustically transparent crimplene
Finish                                Black Ash, Cherry, Mahogany, Maple & Ebony

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
CarbonPro6

TOP

Carbon Pro 6

Nominal Impedance            4 ohms
Recommended Amplifiers  10 to 250 watts
Frequency Response        25hz to 30Khz
Sensitivity                          90db linear for 1 watt at 1 metre
Bass Driver                        2 x 6.5” studio professional drive units with pure polymer
                                          impregnated & polished carbon weave cone with rear lacquer
                                          & concentric weighting.
Midrange Driver                 2” soft dome with pure polymer impregnated carbon weave
                                          air coupling.
Tweeter                             ProAc ribbon with diaphragm as ‘light as a human hair’ alnico
                                          magnet and rear chamber damping.
Crossover                          Finest components on dedicated circuit board. ProAc multistrand
                                          oxygen-free copper cable throughout split for optional
                                          bi wiring and bi amping.
Dimensions                        46.75” (1185 mm) high with spikes and plinths
                                          8.5” (215 mm) wide
                                          14.5” (370 mm) deep
Weight                               97 lb (44 kg) each unpacked
Mode                                 Floor standing with spikes
Grille                                  Acoustically transparent crimplene
Finish                                 TBA

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN
Divider
CarbonPro8

TOP

Carbon Pro 8

Nominal Impedance           4 ohms
Recommended Amplifiers  10 to 500 watts
Frequency Response        20hz to 30Khz
Sensitivity                          91.5db linear for 1 watt at 1 metre
Bass Driver                        2 x 8” (200 mm) studio professional drive units with pure
                                          polymer impregnated and polished carbon weave cone with
                                          rear lacquer and concentric weighting.
Midrange Driver                 3” (75 mm) soft dome with pure polymer impregnated carbon
                                          weave air coupling.
Tweeter                             ProAc ribbon with diaphragm as ‘light as a human hair’ alnico
                                          magnet and rear chamber damping.
Crossover                          Finest components on dedicated circuit board. ProAc multistrand
                                          oxygen-free copper cable throughout split for optional bi wiring
                                          and bi amping.
Dimensions                        49.2” (1230 mm) high with spikes and plinths
                                          9.6” (240 mm) wide
                                          18” (450 mm) deep
Weight                               146.9 lb (68 kg) each unpacked
Mode                                 Floor standing with spikes
Grille                                  Acoustically transparent crimplene
Finish                                 TBA

* Due to our policy of continuous improvement specifications are subject to change without notice.

EnquireN

TOP

GreyBox-B
GreyBox-TR
GreyBox-R
GreyBox-BR
RightSide
Bottom

Copyright & Disclaimer

© Copyright 2012 The Audiophile, a division of Tasman Satellite Services Limited, All rights reserved.
Site Developed by Duke Design.